Ideal for sample collection, preparation, and long-term storage.HTS-friendly—compatible with most liquid-handling robots.SBS footprint meets ANSI/SLAS 1-2004.Flatness tested for reliable automation performance.Raised rims on each well facilitate secure sealing with films or sealing mats.Optimum..
Ideal for sample collection, preparation, and long-term storage.HTS-friendly—compatible with most liquid-handling robots.SBS footprint meets ANSI/SLAS 1-2004.Flatness tested for reliable automation performance.Raised rims on each well facilitate secure sealing with films or sealing mats.Optimum..
Ideal for sample collection, preparation, and long-term storage.HTS-friendly—compatible with most liquid-handling robots.SBS footprint meets ANSI/SLAS 1-2004.Flatness tested for reliable automation performance.Raised rims on each well facilitate secure sealing with films or sealing mats.Optimum..
Ideal for sample collection, preparation, and long-term storage.HTS-friendly—compatible with most liquid-handling robots.SBS footprint meets ANSI/SLAS 1-2004.Flatness tested for reliable automation performance.Raised rims on each well facilitate secure sealing with films or sealing mats.Optimum..
Ideal for sample collection, preparation, and long-term storage.HTS-friendly—compatible with most liquid-handling robots.SBS footprint meets ANSI/SLAS 1-2004.Flatness tested for reliable automation performance.Raised rims on each well facilitate secure sealing with films or sealing mats.Optimum..
Recommended temperature range: -20 to +80 °CFilm: rayon Adhesive: medical-grade Total thickness: 140 μm Properties: breatheable, pierceableFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for well..
Recommended temperature range: -20 to +80 °CFilm: rayon Adhesive: medical-grade Total thickness: 140 μm Properties: breatheable, pierceableFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for well..
Recommended temperature range: -20 to +80 °Cnon-cytotoxic, highly gas permeableeasily pierceable for sample recoveryFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for wells near the plate edges...
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableSimilar to AlumaSeal 96 but not for raised-rim plates. Single full-width end tab with no perforation...
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableThicker adhesive for better sealing and evaporation control with PCR plates with narrow or irregular sealing surfaces. Sized to fi t within the edges of raised-rim PCR p..
Recommended temperature range: -80 to +120 °CFilm: aluminum, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: pierceable, single end tabThicker foil and adhesive than other AlumaSeal products for best performance in long-term cold-storage applications. A single non-perforated end tab simplifi ..
Recommended temperature range: -80 to +120 °CFilm: aluminum, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: pierceable, single end tabThicker foil and adhesive than other AlumaSeal products for best performance in long-term cold-storage applications. A single non-perforated end tab simplifi ..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Recommended temperature range: -40 to +80 °CFilm: vinyl, 203 μm thick Adhesive: acrylic, 37 μm thick Properties: white, opaqueMaximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading luminometers. Use as microscopy backing matrix for fi lter-plate samples, e.g. ELISPOT a..
SealPlate® 50 µm thickness polyester sealing films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. Secure sealing of all wells eliminates "edge effects" in sensitive ELISA assays. SealPlate sealing films can also be used with ..
SealPlate® 50 µm thickness polyester sealing films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. Secure sealing of all wells eliminates "edge effects" in sensitive ELISA assays. SealPlate sealing films can also be used with ..
Film: polyester, 50 μm thick Adhesive: acrylic, 41 μm thick Properties: non-pierceable. An improved fi lm for classic thermal cycling applications. Compared to original ThermalSeal® films (below), ThermalSeal 2 fi lms off er better adhesion, reduced evaporation, longer end tabs for easier handling, ..
Recommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: non-pierceableAdvanced version of classic ThermalSeal fi lms above. Thicker, stronger adhesive for bettersealing and evaporation control with PCR plates with narrow or irregular s..
Sheet dimensions> 19.0 x 97.3 mmRecommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: non-pierceableHeat-resistant polypropylene sealing fi lm with two end tabs for thermal cycling applications.MiniStrips™ version designed fo..
Recommended temperature range: -40 to +120 °CFilm: polyester, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: optically clear, 2 end tabsFor more information: www.excelscientifi c.com/thermalseal_content.html#RTAn economical fi lm with high optical clarity and low autofl uorescence suitable f..
Recommended temperature range: -40 to +120 °CFilm: polyester, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: optically clear, 2 end tabsFor more information: www.excelscientifi c.com/thermalseal_content.html#RTAn economical fi lm with high optical clarity and low autofl uorescence suitable f..
Recommended temperature range: -70 to +100 °CFilm: polyolefi n, 50 μm thick Adhesive: silicone, 50 μm thick Properties: optically clear, chemical resistantThe silicone adhesive provides the strongest available seal, compatible with all PCR plates. For easy handling, the pressure-sensitive adhesive i..
Recommended temperature range: -70 to +100 °CFilm: polyolefi n, 50 μm thick Adhesive: silicone, 50 μm thick Properties: optically clear, chemical resistantThe silicone adhesive provides the strongest available seal, compatible with all PCR plates. For easy handling, the pressure-sensitive adhesive i..
Recommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: non-pierceableHeat-resistant polypropylene sealing fi lm with two end tabs for thermal cycling applications.MiniStrips™ version designed for sealing one or two 8-well rows at a ti..