Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableSimilar to AlumaSeal 96 but not for raised-rim plates. Single full-width end tab with no perforation...
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableThicker adhesive for better sealing and evaporation control with PCR plates with narrow or irregular sealing surfaces. Sized to fi t within the edges of raised-rim PCR p..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Film: polyester, 50 μm thick Adhesive: acrylic, 41 μm thick Properties: non-pierceable. An improved fi lm for classic thermal cycling applications. Compared to original ThermalSeal® films (below), ThermalSeal 2 fi lms off er better adhesion, reduced evaporation, longer end tabs for easier handling, ..
Recommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: non-pierceableAdvanced version of classic ThermalSeal fi lms above. Thicker, stronger adhesive for bettersealing and evaporation control with PCR plates with narrow or irregular s..
Sheet dimensions> 19.0 x 97.3 mmRecommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: non-pierceableHeat-resistant polypropylene sealing fi lm with two end tabs for thermal cycling applications.MiniStrips™ version designed fo..
Recommended temperature range: -40 to +120 °CFilm: polypropylene, 50 μm thick Adhesive: acrylic, 25 μm thick Properties: non-pierceableHeat-resistant polypropylene sealing fi lm with two end tabs for thermal cycling applications.MiniStrips™ version designed for sealing one or two 8-well rows at a ti..