Recommended temperature range: -20 to +80 °CFilm: rayon Adhesive: medical-grade Total thickness: 140 μm Properties: breatheable, pierceableFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for well..
Recommended temperature range: -20 to +80 °CFilm: rayon Adhesive: medical-grade Total thickness: 140 μm Properties: breatheable, pierceableFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for well..
Recommended temperature range: -20 to +80 °Cnon-cytotoxic, highly gas permeableeasily pierceable for sample recoveryFor cell or bacterial growth in plates and bio-blocks AeraSeal fi lms allow uniform air and CO2 exchange for all wells, unlike lids which favor exchange for wells near the plate edges...
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableSimilar to AlumaSeal 96 but not for raised-rim plates. Single full-width end tab with no perforation...
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 38 μm thick Adhesive: acrylic, 38 μm thick Properties: pierceableThicker adhesive for better sealing and evaporation control with PCR plates with narrow or irregular sealing surfaces. Sized to fi t within the edges of raised-rim PCR p..
Recommended temperature range: -80 to +120 °CFilm: aluminum, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: pierceable, single end tabThicker foil and adhesive than other AlumaSeal products for best performance in long-term cold-storage applications. A single non-perforated end tab simplifi ..
Recommended temperature range: -80 to +120 °CFilm: aluminum, 50 μm thick Adhesive: acrylic, 50 μm thick Properties: pierceable, single end tabThicker foil and adhesive than other AlumaSeal products for best performance in long-term cold-storage applications. A single non-perforated end tab simplifi ..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Recommended temperature range: -80 to +120 °CFilm: aluminum foil, 36 μm thick Adhesive: acrylic, 28 μm thick Properties: pierceable, 2 end tabsSoft, chemical-resistant aluminum foil with strong medical-grade adhesive. Length with endtabs removed is 125.4 mm for fl at-top plates. For raised-rim plate..
Recommended temperature range: -40 to +80 °CFilm: vinyl, 203 μm thick Adhesive: acrylic, 37 μm thick Properties: white, opaqueMaximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading luminometers. Use as microscopy backing matrix for fi lter-plate samples, e.g. ELISPOT a..
SealPlate® 50 µm thickness polyester sealing films minimize evaporation, prevent spillage and contamination between wells, and provide a secure seal, not just a cover. Secure sealing of all wells eliminates "edge effects" in sensitive ELISA assays. SealPlate sealing films can also be used with ..