UVC/T-M-AR, DNA/RNA UV-cleaner box

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV--cleaner box provide protection against contamination.

Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

Ozone free high density UV decontamination

Long living UV lamps (9,000 hours average)

Automatic switch off of UV-lamps when the protective screen is opened

Bactericidal flow-type recirculator providing permanent decontamination inside UV –cleaner box during operation

Shockproof glass walls

Low noise, low energy consumption

Tables for installation of UV-cleaner boxes

UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material                                          +               Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)

Working surface material                                       Stainless steel

Open UV-lamp                                                          1 x 25W built‑in bactericidal, TUV25WG13 UV-C

UV radiation level                                                    15 mW / cm2 / sec

Radiation type                                                           UV (λ = 253.7 nm), ozone-free

Digital time setting of direct UV exposure           1 min–24 hrs / non–stop (increment 1 min)

UV-recirculator                                                         1x25W (efficiency >99% per 1 hour)

Daylight lamp (for working area illumination)    1 x TLD-15W

Thickness of side panels                                        4 mm

Thickness of upper front panel                            8 mm

Thickness of screen                                               4 mm

Optical transmission                                             95%

UV protection                                                        >96%, UV-protection film

Working area                                                        650 × 475 mm

Safety features                                                     Automatic open UV-lamp switch off when screen is open

Power outlets inside the unit                            Inlet for power cords or optional 1x Built-in socket, max. 1000 W (pls, order respectively)

Nominal operating voltage                                100-240 V, 50/60Hz

Power consumption                                            67 W

Overall dimensions (W×D×H)                            690 × 535 × 555 mm

Weight (net / gross)                                            28.8 / 39 kg

Optional table                                                      T-4 (800 × 600 × 750 mm)