DNA/RNA UV-cleaner box UVT-S-AR is designed for clean operations with
DNA samples. UV-cleaner box provide protection against contamination.
Model is a bench-top type, made of metal framework,
glass walls, working surface made of stainless steel.
UV-cleaner boxes are equipped with an open UV lamp
installed in the upper hood. UV-radiation from the open lamps disinfects the
working area inactivating DNA/RNA fragments during 15–30 min of exposure. A
digital timer controls duration of the direct UV irradiation. A daylight lamp
provides proper illumination of the working surface.
UV-cleaner boxes are equipped with a flow-type
bactericidal UV cleaner–recirculator AR, which provides constant
decontamination inside the box during operation. They are recommended for
operations with DNA/RNA amplicons.
UV cleaner–recirculator AR consists of a UV lamp, a
fan and dust filters organized in a special body so that a user working with a
UV-cleaner box is protected against UV light. Recirculator increases the
maximum density of UV light making it sufficiently effective for DNA/RNA
inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per
hour, creating permanent aseptic conditions of operation inside the UV-cleaner
box.
Specially assigned moving tables T-4L (with wheel locks) with a drawer are
available on request.
Advantages of Biosan UV-cleaner boxes:
·
Ozone free high density UV decontamination
·
Long living UV lamps (9,000 hours average)
·
Automatic switch off of UV-lamps when the protective
screen is opened
·
Bactericidal flow-type recirculator providing
permanent decontamination inside UV – cleaner box during operation
· Shockproof glass walls
· Low noise, low energy consumption
·
Tables for installation of UV-cleaner boxes
·
UV-cleaner boxes with the bactericidal UV
cleaner–recirculator AR is the patented Biosan solution
Specification
Walls material |
Rear: stainless steel Sides and front: glass
(EUROGLASS, Germany) |
Working surface material |
Stainless steel |
Open UV-lamp |
2x30W built‑in bactericidal, TUV30WG13 UV-C |
UV radiation level |
15 mW / cm2 / s |
Radiation type |
UV (λ = 253.7 nm), ozone-free |
Digital time setting of direct UV exposure |
1 min–24 hrs / non–stop (increment 1 min) |
UV-recirculator |
1 х 30W (efficiency >99% per 1 hour) |
Daylight lamp (for working area illumination) |
1 x TLD-30W |
Thickness of side panels |
4 mm |
Thickness of upper front panel |
8 mm |
Thickness of screen |
5 mm |
Optical transmission |
95% |
UV protection |
>96%, UV-protection film |
Working area |
1200 × 520 mm |
Safety features |
Automatic open UV-lamp switch off when screen is
open |
Power outlets inside the unit |
3 Built-in sockets max. 1000 W and inlet for power
cords |
Nominal operating voltage |
100-240 V, 50/60Hz |
Power consumption |
135 W |
Overall dimensions (W×D×H) |
1245 × 585 × 585 mm |
Weight (net / gross) |
58 / 68.5 kg |
Optional table |
T-4L (1290 × 600 × 770 mm) |
Optional drawer unit |
LF-1 (300 × 450 × 705 mm) |
- Availability: In Stock
- Model BS-040107-AAA
- Weight: 35.00kg
- Dimensions (L x W x H): 690.00cm x 535.00cm x 555.00cm